Address: 2447 N. George Street, York, PA. 17406
"Parking Lot Striping Layout"
When laying out a parking lot for striping there are many factors that should be taken into consideration. This article should add some insight into the details of laying out a parking lot.
Another consideration in the layout proccess is determining the width of the drive lanes. The standard drive lane is 23 1/2 feet wide for 90 degree parking stalls. If it is determined that there is not enough space to install the standard drive lane width, it may be necessary to install angled stalls. The average drive lane width for angled stalls is 18 feet wide. To maintain this distance for the drive lane, the planner must determine the angle of the stalls. Some of the common stall angles are 45 degrees and 60 degrees. Now that spacing for the individual spaces and drive lanes have been accounted for, the next step is to lay out handicap areas.
The amount of total spaces will dictate how many handicap spaces will be needed. For futher information on this subject read our article "ADA compliance requirements". The handicap spaces should be placed on flat ground and they should be adjacent to an accessible cross-walk that leads to a handicap ramp. Handicap parking should be placed as close to the entrance as possible.
Finally, a planner should understand the pavement marking requirements. If there are any stop signs, it is a good idea to place a stop bar on the ground by the stop sign. This pavement marking assist the driver in knowing where to stop to avoid being exposed to oncoming traffic. Another marking that is necassary in most cases is the "no parking" and "fire lane" stencils. Directional arrows also assist in directing traffic.
In conclusion, to effectively layout a parking lot for line painting and pavement marking a planner must take the following into account.
1. The size of the lot.
2. Traffic Patterns.
3. Parking Space Dimentions.
4. Drive Lane Width.
5. Handicap space requirements and locations.
6. Pavement Marking & Directional Arrows.
2. Traffic Patterns.
3. Parking Space Dimentions.
4. Drive Lane Width.
5. Handicap space requirements and locations.
6. Pavement Marking & Directional Arrows.
The first thing is to determine the dimension of the parking lot. As the typical parking spot is 9' wide and 18' long, it should be determined how many spaces can be painted without inhibiting traffic flow. With that being said, it is essential to determine the traffic flow in laying out a parking lot for stripping.
Just Seal It LLC. is a full service asphalt maintenance and pavement marking contractor specializing in asphalt sealcoating, asphalt repair, asphalt crack sealing, line striping, thermoplastics, trafic sign installation, and car stops. Just Seal It LLC serves the following areas: York PA, Harrisburg PA, Lancaster PA, Baltimore Md, Columbia Md, Hanover Md, Glen Burnie Md, Laural Md, & Annapolis Md. Please call 717-855-7775 to request a free "no obligation" quote.
Just Stripe It © is the reconized Pavement Marking / Line Painting leader in the Baltimore Md, Cockeysville MD, Timonium Md, Parkville MD, Bel Air MD, and Towson MD areas. Our well trained staff will beautify your Parking Lot with freshly painted lines. Just Stripe It © only uses top quality Sherwin Williams Traffic Paint. Call today for your free no obligation quote !